EVde HID Series
EVde-…H.I.D. Series Lighting Fixtures have been designed to house Built-in control gear for High Intensity Discharge (H.I.D.) Lamps and to manage the light source, driving it where required by way of suitable re ectors and refractors. Due to the corrosion resistant body, cast copper-free aluminium construction (Cu<0.1%) and tempered glass for lamp compartment, EVde-…H.I.D. Lighting xtures can provide small dimensions/low weight combined with a wide range of wattage: from 50W up to 400W. The EVde- H.I.D. solution, with its built-in control gear on plate and the top side Ex-e Junction box, allows End Users and Concrators to save almost: 1 Junction Box, 2 cable glands and a minimum of 30 minutes of man power cost during the light installation process.
EVde-…H.I.D. Series Lighting Fixtures have been designed to house Built-in control gear for High Intensity Discharge (H.I.D.) Lamps and to manage the light source, driving it where required by way of suitable re ectors and refractors. Due to the corrosion resistant body, cast copper-free aluminium construction (Cu<0.1%) and tempered glass for lamp compartment, EVde-…H.I.D. Lighting xtures can provide small dimensions/low weight combined with a wide range of wattage: from 50W up to 400W. The EVde- H.I.D. solution, with its built-in control gear on plate and the top side Ex-e Junction box, allows End Users and Concrators to save almost: 1 Junction Box, 2 cable glands and a minimum of 30 minutes of man power cost during the light installation process.
Specifications
Material Copper-free aluminium (Cu<0,1%) Temperature -50°C to 60°C, See speci c limitations in the relative tables for lamps typology IP Rating IP65 Certification & Approvals EC-Type Examination Certi cate INERIS 01ATEX0019X GOST Certi cate IT. 04. 00510 Standards EN 60079-0 / 60079-1 / 60079- 761241-0 / 61241-1 IEC 60079-0 / 60079-1 / 60079-7 / 61241-0 / 61241-1 Ex-code II 2 GD Ex d IIC T5 / T4 / T3 Ex tD A21 IP65 T100°C / T135°C / T200°C Ex de IIC T5 / T4 / T3 Ex tD A21 IP65 T100°C / T135°C / T200°C According to European Directive 94/9/EC (ATEX) For Zone 1 / Zone 2, Zone 21 / Zone 22v Gaskets O-ring made in Nitrile Rubber (NBR) Surface treatment External polyurethane painting “Standard Cycle” Green RAL 6003 Entries Nr. 2 M25 entries Hardware and Screw Stainless steel external hardware Lamps Lighting apparatus EVde series can be equipped with: High Pressure Sodium, Mercury Vapour, Metal Halide lamps (included) Lamps Wattage From 50W to 400W Ballast Ballast technical features depend on lamp type Rated operation voltage (UE) 230 V Frequency 50 Hz Ignitor and Capacitor Ignitor and Capacitor technical features depend on ballast type Power factor > 0,9
Accessories
Available upon request
GEV-…Protection guard
REV-…Standard re ector made of 99.85 aluminium painted white RAL 9003
REVD-…Dome re ector made of 99.85 polished and anodized aluminium
KFE-…High Bay Re ector made of 99.85 polished and anodized aluminium
VERTEVA-…Prismatic Refractor made of virgin acrylic
Lampholder Ceramic lamp holder
Note Adjustable stainless steel mounting bracket (included), suitable for ceiling; pendant; wall; pole
installation. 4x4sqmm+E mains terminal in Ex-e compartment (included)
EVde HID Series.
