EVde I/HA Series
EVde- . I ./HA Series Lighting Fixtures have been designed to house Incandescent and halogen lamps and to manage the light source, driving it where required by way of suitable re ectors and refractors. Due to the corrosion resistant body, cast Copper free Aluminium construction (Cu<0,1%) and tempered glass for lamp compartment, EVde-.I./HA Lighting xtures can provide small dimensions/low weight combined with wattages up to 300W. The EVde-…I./HA solution, with its top side Ex e Junction box, allows End Users and Contractors to save 1 Junction Box, 2 cable glands and a minimum of 30 minutes of man power cost during the installation process.
EVde- . I ./HA Series Lighting Fixtures have been designed to house Incandescent and halogen lamps and to manage the light source, driving it where required by way of suitable re ectors and refractors. Due to the corrosion resistant body, cast Copper free Aluminium construction (Cu<0,1%) and tempered glass for lamp compartment, EVde-.I./HA Lighting xtures can provide small dimensions/low weight combined with wattages up to 300W. The EVde-…I./HA solution, with its top side Ex e Junction box, allows End Users and Contractors to save 1 Junction Box, 2 cable glands and a minimum of 30 minutes of man power cost during the installation process.
Specifications
Material Copper-free aluminium (Cu<0,1%)
Temperature -50°C to 60°C
See speci c limitations in the relative
tables for lamps typology
IP Rating IP65
Certification
& Approvals
EC-Type Examination Certi cate
INERIS 01ATEX0019X
GOST Certi cate
IT. 04. 00510
Standards EN 60079-0 / 60079-1 / 60079-7 / 61241-0 / 61241-1
IEC 60079-0 / 60079-1 / 60079-7 / 61241-0 / 61241-1
Ex-code II 2 GD
Ex d IIC T5 / T4 / T3
Ex tD A21 IP65 T100°C / T135°C / T200°C
Ex de IIC T5 / T4 / T3
Ex tD A21 IP65 T100°C / T135°C / T200°C
According to European Directive 94/9/EC (ATEX)
For Zone 1 / Zone 2, Zone 21 / Zone 22
Gaskets O-ring made in Nitrile Rubber (NBR)
Surface treatment External polyurethane painting
“Standard Cycle” Green RAL 6003
Entries Nr. 2 M25 entries
Hardware and Screw Stainless steel external hardware
Lamps Lamp included: Incandescent / Halogen
Lamps Wattage Up to 300W
Rated operation voltage (UE) 230 V
Accessories
Available upon request GEV-…Protection guard REV-…Standard re ector made of 99.85 aluminium painted white RAL 9003 Lampholder Ceramic lamp holder Note Adjustable stainless steel mounting bracket (included), suitable for ceiling; pendant; wall; pole installation 4x4sqmm+E mains terminal in Ex- compartment (included) EVde I/HA Series Lighting EVde- . I ./HA Series Lighting Fixtures have been designed to house Incandescent and halogen lamps and to manage the light source, driving it where required by way of suitable re ectors and refractors. Due to the corrosion resistant body, cast Copper free Aluminium construction (Cu<0,1%) and tempered glass for lamp compartment, EVde-.I./HA Lighting xtures can provide small dimensions/low weight combined with wattages up to 300W. The EVde-…I./HA solution, with its top side Ex e Junction box, allows End Users and Contractors to save 1 Junction Box, 2 cable glands and a minimum of 30 minutes of man power cost during the installation process.
