Lumascape LS333ANS-2LED Swimming Pool Luminaire

CV. SAVONT INDONESIA

Ruko Serua Indah Residence, Jln. Serua Raya no.9 Reni Jaya - Bojongsari - Depok , Jawa Barat 16517
 Telp : 021- 7419460 Fax : 021- 7419460 
Contact Person : Tommy Bhong (08.11111.0694 / 0815.160.6771 / 0859.3976.3399)
Whatsapp : 08.11111.0694, BBM : 7D1DEF31  Skype : tommy.bhong2
Email : sales_support@savontindonesia.com Website :http://www.savont-indonesia.net/ 

Lumascape LS333ANS-2LED Swimming Pool Luminaire



The LS333ANS-2LED is a swimming pool-rated luminaire, and one of Lumascape’s most
popular luminaires. It is constructed entirely of 316 marine grade stainless steel, and has
a special alignment feature to ensure the beam of light is perpendicular to the installation
surface, even if the wet niche is not. The use of LED allows for the creative introduction of
color and improved energy efficiency.



Specifications
Lamp Source 3 W or 6 W LED
□ White (4 300 K typical)
■ Warm white (3 000 K typical)
■ Blue (470 nm)
Other colors by request
Approved Use Swimming pools and fountains - wet niche
Not approved for use in Canada
Control Options On-site or factory-programmable brightness
IP Rating IP68 to 6' (2 m)
Construction 316 marine grade stainless steel
Impact Rating IK10 with OptiClear™ lens
Standard Inclusions Teflon coated cover screws
MicroAntiLeach™ wire entry
Thermal cutout
16.4' (5 m) underwater cord
For extra length consult factory
Remote Transformers
Order separately
Refer to Technical Data section
for application specific options
Ambient Operating
Temperature
-40 °F to 122 °F (-40 °C to +50 °C)
Photometrics Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement

Transformer and Remote Driver Compatibility
ansformers for Submersible & Swimming Pool-rated LED Luminaires

The following list of transformers are for use with submersible and/or pool rated luminaires specifically described as being compatible with either 12 V AC (wirewound
only) transformers. Compatibility will be noted in the ordering code of the luminaire concerned, and will typically be referenced by Voltage Code '13' or '13-DIM'. In the
case of '13-DIM' additional components may be required. Refer to the applicable wiring diagram/s.
Compatibility with each transformer or power supply is indicated by the value mentioned, representing the maximum number of luminaires that may be powered
from each transformer or power supply. Please note, this does not take into consideration voltage drop or ampacity limits of the branch circuit. For assistance, please
contact factory.