CG. series cable glands for unarmoured cables
CGA. series cable glands for armoured cables
CGF. series cable glands for armoured cables
with conduit protection
• Use
The cable glands for non armoured and armoured cables
are normally used in the chemical and pretrochemical
plants, off-shore platforms, refineries and any other
industry where hazardous atmospheres (gas and
combustible dust) are potentially present.
• Function
The cable glands are normally installed to allow direct entry of unarmoured (CG serie) or armoured (CGA serie) cables into Ex-d
and Ex-e enclosures so to provide any electrical connection with external circuits.
The cable glands for non armoured cables are provided with a complete set of internal gaskets to meet any form of
requirements. The sealing ring of CGF series is female threaded to allow the connection with a rigid or flexible conduit
protecting the cable for specific kind of installations.
The cable glands for armoured cables, due a particular design, are equipped with a sole gasket covering a wide range of cable
sizes so to facilitate the choice and the installation.
The cable glands with cylindrical threads are equipped with O-ring so to grant and IP 66/68 protection to the enclosure.
• Construction
The materials used to manufacture the cable glands have been studied to grant the maximum protection against the highly
corrosive agents present in these industries.
They are available in:
• brass
• nickel plated brass
• stainless steel AISI 316
The O-ring and internal gaskets are made in neoprene and, for low and high temperature environments, in silicone.
All the equipment has the double marking for Ex-d and Ex-e installations with the sole exception of the components threaded
with PG – DIN 40430 that are available only for Ex-e installations.
The cable glands to be used with circuit Ex-i, can be requested with pressure cap painted light blue.
• Ordering Codes
The material code, as per side table, has to be added at the
end of the code of cable gland, earth tag or lock nut.
On request, there are available other types of thread for any
special purpose.
• Protection
certificate number: IMQ 12 ATEX 010 X
marking: ` II 2GD Ex d IIC Gb - Ex e IIC Gb - Ex tb IIIC Db
ambient temperature: -60°C +180°C
degree of protection: IP66 / IP68
conformity: Directive ATEX 94/9/EC
standards: EN60079-0 / EN60079-1 / EN60079-7 / EN-60079-11 / EN60079-31 / EN60529
category: suitable for Zone 1 – 21 (gas) and Zone 2 – 22 (dust)
If you need enquiry, product consultation, please contact us :
PT. SAVONT VARAVI INDONESIA
DISTRIBUTOR RESMI LAMPU PHILIPS
SAVONT BUILDING KAV 5-9, Jln. Serua Raya, Bojongsari - Depok , Jawa Barat 16517
Telp : 021- 7419460/021-7494545 Fax : 021- 7419460
Contact Person : Tommy Bhong / Rere / Wulan / Imelda
Simpati : 08.11111.0694 / 08.11111.8321 / 0811.989.202
Indosat : 0815.160.6771
XL : 08.77777.5353.66
Whatsapp : 08.11111.0694 / 08.11111.8321
Email :
sales_support@savontindonesia.com
customer.service@savontindonesia.com
Website :
https://www.savont-varavi.com/
https://www.distributorlampuphilips.com/
“ Your Partner to Total Lighting & Electrical Equipment Solution”