BEAM SMOKE DETECTOR

Beam Smoke Detectors are the wide area smoke detection technology of choice. Beam smoke detectors offer simplified wiring, installation and maintenance than other detection types and are therefore the best fire detection technology for wide area coverage. A beam smoke detector works by sending an invisible infra-red (IR) beam of light across the area being protected that the receiver then measures. If smoke is present in the air, this obscure, or blocks, the light received by the receiver. When enough smoke is in the air, the IR light level will drop below a set level, which then triggers an alarm condition. All of our products are manufactured in the UK. Choose Fireray® to take advantage of an accurate and reliable product, backed by 40 years of experience.

There is two type of beam smoke detectors:

a. End to End Should typically be considered where there are reflective surfaces close to the beam’s path, or where the beam path would be restricted due to fixed obstructions. Operating range 16.5 ft 393 ft (5 to 120m)

b. Reflective Most widely used and requires less wiring, which offers reduced installation cost and time. Operating range 26.2 ft to 328 ft (8 m to 100 m).

Brand Support for FIRE ALARM AND SAFETY SYSTEM SOLUTION

E2S Warning Signals, Notifier by Honeywell, Minimax Viking, Gasensor Technology, Apollo Fire Solutions, Patol Fire Detection Solutions, Fireray Manufacture by FFE